|
|
Current location: Lasers
635nm Diode Collimated Red Laser |
635nm Line Laser (1-20mW)
Specifications: |
Model |
JGI-635-LM-L |
Output Power @ 25 ℃ |
1-20mW |
Wavelengths |
635nm |
Dimension |
Φ12mm, length 48mm and Φ16mm,length 70mm |
Supply Voltage |
DC3~5V |
Operating Current |
<150mA |
Line Angle |
30°,45°,60°,90°,110°,130° |
Line Width |
<1mm (1M) |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty |
6 months |
635nm Cross Line (1-20mW)
Specifications: |
Model |
JGI-635-LM |
Output Power @ 25 ℃ |
1-15mW |
Wavelengths |
635nm+5nm |
Dimension |
Φ12mm, length 32mm and Φ16mm, length 70mm |
Supply Voltage |
DC3~5V |
Operating Current |
≤60mA |
Beam Divergence (1/e2, Full Angle) |
1.5 mrad |
Beam diameter at the aperture |
2x5mm |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature: |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty time |
6 months |
635nm Laser Moudle (20-25mW)
Specifications: |
Model |
JGI-635-LM |
Output Power @ 25 ℃ |
20-25mW |
Wavelengths |
635nm+5nm |
Dimension |
Φ14mm, length 38mm |
Supply Voltage |
DC3~5V |
Operating Current |
<160mA |
Beam Divergence (1/e2, Full Angle) |
1.5 mrad |
Beam diameter at the aperture |
2x5mm |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty time |
6 months |
635nm Lasers (50-500mW)
Specifications: |
Model |
JGI-635-LM-T |
Output Power @ 25 ℃ |
50-500mW |
Wavelengths |
635+5nm |
Transverse mode |
TE00 |
Operating Mode |
CW |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<5 minutes |
Beam divergence (1/e2, Full Angle) |
<3mrad |
Beam diameter at the aperture |
<6mm |
M2 factor |
<20 |
Point stability after warm-up |
<0.05mrad |
Spectral linewidth (nm) |
<1.5 |
Polarization ratio |
>50:1 |
Operating temperature |
10-35 ℃ |
Dimensions of Laser head |
127 x 36 x 40mm |
Power Supply |
JGI-PS-900 |
Dimensions of Power Supply |
103 x 76 x 35mm |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
635nm Lasers (600-2000mW)
Specifications: |
Model |
JGI-635-LM-T |
Output Power @ 25 ℃ |
600-2000mW |
Wavelengths |
635±5nm |
Transverse mode |
near TE00 |
Operating Mode |
CW |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<5 minutes |
Beam divergence (1/e2, Full Angle) |
<3mrad |
Beam diameter at the aperture |
~5×8mm |
M2 factor |
<20 |
Point stability after warm-up |
<0.05mrad |
Beam height from base plate (mm) |
28. 5 |
Polarization ratio |
>50:1 |
Operating temperature |
10-35 ℃ |
Dimensions of Laser head |
136 x 73 x 50mm |
Power Supply |
JGI-PS-300 |
Dimensions of Power Supply |
133 x 130 x 65mm |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
635nm Lasers (3W-5W)
Specifications: |
Model |
JGI-635-LM-T |
Output Power @ 25 ℃ |
3000~5000mW |
Wavelength |
635±5nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
93.5mm |
Linear Polarization |
>50:1 |
Beam Diameter at the aperture |
~9.0 × 9.0mm |
Beam Divergence (1/e2, Full Angle) |
<6.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<20 |
Warm-up time |
<5 minutes |
Dimension of laser head |
333 x 140 x 125mm |
Power Supply |
JGI-PS-800 |
Dimension of Power Supply |
300 x 162 x 134mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year | |
|